What to put for desired salary on a job application
A number you would accept, inside the posted range, after you have checked what the role pays. The rest of this guide is how.
By Srinivasaro Velpula, Founder, Job Applier · Published
If the field is optional, leave it blank; if it takes text, write “Negotiable” or a range; if it requires a number, give the figure you would accept, inside the posted range when the posting shows one. That is the whole answer. The rest of this guide shows how to tell the three kinds of field apart, where to find the range when the posting does not show it, and how to avoid the two or three answers that hurt you.
Three kinds of field, three answers
Application forms ask for desired salary in three ways, and the right answer depends on which one you are looking at. Check the field before you type. Is it marked required? Does it accept letters, or only digits? Does the label say hourly, annual, or nothing at all?
| The field | What to put | Why |
|---|---|---|
| Optional, any type | Nothing. Leave it blank. | An empty optional field costs you nothing. A number you give early can only anchor the offer downward. |
| Required, accepts text | "Negotiable", or a range such as 95,000 to 110,000. | Text lets you answer without fixing one number. A range shows you have thought about it. |
| Required, numbers only | One figure you would accept, inside the posted range. | The form will not take anything else. Give a real number, because the recruiter will read it as your ask. |
A lot of people treat every salary field as a trap and either skip it or type something evasive. The field is not a trap. It is a sorting question. The recruiter uses it to check whether your expectation and the budget for the role are in the same neighborhood. A clear answer inside the range gets you through that check.
Find the posting’s range first
Pay-range posting laws now cover many states. California, Colorado, Washington, New York, Illinois, Hawaii, Maryland, Minnesota, Massachusetts, Vermont and the District of Columbia all require employers to show a pay range on postings in some form. Because large employers post the same role in many places, the range is often on the posting even when the job itself sits in a state with no such law.
That range is your anchor. The employer wrote it, which means the budget for the role lives inside it. When the form asks for a number, pick one inside that range. Where you sit inside it depends on how your experience compares with what the posting asks for, which is the subject of the guide to reading a job posting like a recruiter.
Read the range carefully before you use it. Some postings show a very wide range that covers several levels of the same title. Some show a base salary only and leave out bonus and equity. Some show the range for the location where the job was posted, not the one you would work from. If the range looks too wide to be useful, aim for the part of it that matches the years of experience the posting names.
When there is no range: two free sources
Many postings still show no range. Two public sources tell you what the role pays, and both are free.
BLS Occupational Employment and Wage Statistics. The Bureau of Labor Statistics publishes median and percentile wages for every occupation, nationally and by metro area. Look up the occupation that matches the role, then the metro where the job is based. The 25th, median and 75th percentiles give you a working range. It lags the market by a year or so, and it describes an occupation rather than a specific employer, but it is the most reliable floor you can find.
H-1B LCA filings. When an employer sponsors a worker on an H-1B visa, it files a Labor Condition Application that states the wage it promised for that role in that location. These filings are public. They are useful even if you are not on a visa, because they show what one named employer actually pays for a named title in a named city. Job Applier publishes this for every sponsoring employer on its sponsor pages, with the wage levels I to IV the employer filed at. Open /sponsors/ followed by the company name to see them.
Use both. BLS tells you the occupation’s range in the metro. LCA data tells you where this employer sits inside that range. If the two disagree, trust the one that names the employer.
Picking the number
Once you have a range, there are four rules for turning it into an answer.
- The bottom of your range is your answer. If you write 100,000 to 120,000, the recruiter hears 100,000. Set the bottom at a figure you would actually accept, not at a figure you hope they will exceed.
- Never write 0, 1, or 999999. Some forms reject it. The ones that accept it put a number in front of a recruiter that reads as evasion, and the recruiter has dozens of other applications that answered plainly.
- Check the unit. Some fields are hourly and some are annual, and the label is often small. A desired salary of 85,000 in an hourly field is a mistake you will not be able to explain. To convert, use 2,080 working hours in a year. An annual 85,000 is about 40.87 an hour; an hourly 45 is 93,600 a year.
- Match the posting’s currency and form. If the field asks for a base salary, give base, not total compensation. If the posting lists a range in thousands, do not reply in a different unit.
A number inside the posted range, in the right unit, with no decoration, is all the field needs. You are not negotiating in this field. You are confirming that a conversation is worth having.
If you are changing fields or levels, the posted range still rules. A candidate moving from a senior individual role into a first management role should expect the manager range, not a raise on top of it. A candidate moving into a new industry at the same level should expect that industry’s range for the title. Research the role you are applying for, not the one you are leaving.
A worked example
Colorado requires the range, so the posting shows it. The field is required and takes only digits, so “Negotiable” is not available. The candidate has six years of analytics work, which puts them above the posting’s minimum but not at the top of a senior band. BLS data for the Denver metro puts the median for this occupation in the lower middle of the posted range, and the employer’s LCA filings show it has paid similar titles near the middle.
Had the field accepted text, the same candidate could have written “115,000 to 125,000, negotiable”. Had it been optional, the right move would have been to leave it empty.
Common mistakes
- Answering below the posted range. The employer told you the floor. Going under it does not make you a bargain; it makes a recruiter wonder what the résumé is hiding.
- Answering far above it. The budget is the budget. A figure well above the top of the range ends the conversation before it starts, unless you are applying for a different level than the one posted.
- A range whose bottom you would refuse. The bottom is read as your answer. If you would walk away from it, do not write it.
- Mixing hourly and annual. Read the label. Convert with 2,080 hours when you need to.
- Different numbers on different forms. Recruiters at the same company share notes. Keep your figure consistent across every application to that employer.
- Treating the field as the negotiation. The negotiation happens after an offer, with the whole package on the table. The field only decides whether you reach that point.
How Job Applier fills this field
Job Applier’s fill engine writes the desired salary you entered in your profile. It uses your number, the one you typed, not an estimate it made up from the posting or from market data. It never invents a salary. If your profile has no figure and the field is required, the engine leaves the question for you rather than guessing.
Before you submit, it checks your figure against the range on the posting when there is one. If your number sits outside that range, it flags the field so you can change it on that application. Your profile keeps the figure you set, so the next form starts from the same number unless you change it.
The engine also respects the kind of field. An optional salary field is left blank. A text field gets the text you chose for it, so a profile value of “Negotiable” or a range is written as you wrote it. A numeric field gets the number alone, in the unit the field asks for.
If you want to check a figure before you set it, ask the assistant. It can look up BLS wage data for an occupation and metro and read the posting’s range, so you set a profile number with the facts in front of you. Use the guide to reading a job posting like a recruiter to decide where in that range your experience puts you.
Try it with AI job search
AI job search reads your profile and the posting the way this guide describes. Open it and type one of these.
- What does a senior data analyst earn in Denver?It checks BLS wage data for the occupation and metro and gives you the percentiles as a working range.
- Is my desired salary inside the range for this job?Paste the posting after it. It compares the posted range with the figure in your profile and tells you where you sit.
- What has this company paid for this title?It reads the employer’s LCA filings, where they exist, and shows the wage levels for the role and city.
Questions people ask
- Should I leave the desired salary field blank?
- Yes, if the form lets you. An optional salary field does not need an answer, and leaving it blank keeps the number for a conversation where you know more. If the form rejects an empty field, treat it as required and give a figure you would accept.
- What do I write if the field accepts text?
- Write Negotiable, or a range such as 110,000 to 125,000. A range tells the recruiter you have thought about it without fixing one number. Keep the bottom of the range at a figure you would actually take, because a recruiter reads the bottom as your answer.
- Can I put 0 or 999999 to skip the question?
- No. Some forms reject it outright, and the ones that accept it show the recruiter a number that reads as evasion or as a joke. If the field requires a number, give a real one. If you want to signal flexibility, use the text or notes field for Negotiable.
- How do I find out what the job pays?
- Start with the posting. Pay-range laws in states such as California, Colorado, Washington, New York and Illinois put a range on many postings. If there is none, use BLS Occupational Employment and Wage Statistics for the occupation and metro, and H-1B LCA filings for what that employer promised for the role.
- How does Job Applier fill the desired salary field?
- It writes the desired salary you entered in your profile, as a number, and never estimates one for you. When that figure sits outside the range on the posting, it flags the field so you can change it before you submit. If your profile has no figure, it leaves the question for you.